|
|
 |
|
|
|
|
|
|
|
|
|
|
|
 |
 64Kx16
fast RAM add-on card for Adapt912 and Adapt912B32
MIN and BB configurations also work with Adapt912DT60,
and Adapt912DG128
perfect
for rapid code developmentavoid
the Flash erase-program cyclerun
Dbug12 from write-protected RAM
develop
your application in 30K RAM (with DBug12), or 60K RAM (without DBug12)use
actual vectors instead of pseudo-vectors
quick RAMloader resides in EEPROM, and supports Load & Run from RAM
additional
hardware options available (see below)Twin
Configuration for
upgrading Adapt912 Starter Package module
or
new "pass-thru" connector option for board-stacking
11 connector options for the ultimate in
modular
design capabilities |
Documents:
Datasheet (150K)
App Note 105 Using The Adapt912 MX1 Expansion Card (updated 3/29/00)
App Note 108 Using Adapt912DG128 with MX1 Expansion Card
Data Sheet for PCF8593 Clock/Calendar ChipDownloadable files:
Quick RAMloader Resides in '912B32 EEPROM. Works with any terminal program at 38.4 Kbaud to load your .S19 file into RAM (DBug12 not used) (updated 3/29/00)
Modified DBug12 is a patched version which puts the MCU in Expanded Wide Mode so that you can access MX1 RAM. DBug12 resides in upper 32K RAM, with your application in lower 32K
Serial EEPROM & RTC example code in assembler
Adapt912 Demo Program is an assembly language program exampleAvailable Configurations: (Order Online at http://www.technologicalarts.ca/index.php)
MIN: RAM only (not battery-backed)BB: RAM with battery backupcompatible with Adapt912, Adapt912B32, Adapt912DT60, and Adapt912DG128 Order Code: AD912MX1/MIN-- (specify connector options) MBT: all features of MIN + battery-backup, clock/calendar, SPI-based eight-bit output port + 32Kx8 EEPROMcompatible with Adapt912, Adapt912B32, Adapt912DT60, and Adapt912DG128 Order Code: AD912MX1/BB-- (specify connector options)
compatible with Adapt912 and Adapt912B32 only (not compatible with Adapt912DT60 and Adapt912DG128) Order Code: AD912MX1/MBT-- (specify connector options)
M32: all features of MBT + high-speed SPI-based UART with RS232 interface (with 9-pin D-sub connector)
compatible with Adapt912 and Adapt912B32 only (not compatible with Adapt912DT60 and Adapt912DG128) Order Code: AD912MX1/M32-- (specify connector options)
