Features: 1.7" x 2.8" standard Adapt11 form factor compatible with Adapt11, Adapt11C24DX, and all Adapt12 families based on SN754410 dual H-bridge chip plus logic four channels standard version: 1 Amp per channel high-current version (piggy-backed H-bridge chips):  up to 2 Amps per channel ! drives four DC motors or two stepper motors use 8 MCU output lines to control Enable and Direction of current through each H-bridge 9th MCU output line controls logic MOSFET for on/off control of solenoid, relay, DC motor, etc. port pin assignments are reconfigurable via wire links includes LED indicators to show current direction separate connector for motor supply voltage (up to 24V) on-board 5V regulator can power all logic and Adapt11 several connector options offer many configuration possibilities board has mirror-image pinout  (photo at left shows board with FRA connector) use with prototyping board and backplanes, in a planar arrangement (shown at right), or stack with other boards (clearance restrictions apply) comes with schematic and SN754410 data sheet Order Online at http://www.technologicalarts.ca/index.php

PRODUCT RESOURCES:
Schematic Diagram
Data Sheet for SN754410 1 Amp Dual H-bridge Chip