Last update: 1 November 2005

Accessories Available

Features: ultra-compact 2" x 2" board socket for 68HC11 MCU available with 8K or 32K EEPROM, plus 32K RAM surface-mount chips for low-profile, high-density design 8-channel 8-bit analog-to-digital converter all PORT A lines available (pulse accumulator, input captures, output compares) four PORT D lines available (SPI) all PORT E lines available (8 analog/digital inputs) 8 MHz crystal standard Turbo version has 9.8304 MHz crystal--  supports baud rates to 38400 5V low-dropout regulator RS232 interface (3-wire) reset circuit and pushbutton all available port lines/interrupts/reset brought out to versatile 26-pin header convenient switches for RUN/LOAD and WRITE PROTECT (EEPROM) easy s-record loading using any standard 68HC11 loader (eg. MicroLoad, XLOAD, ICC11, PCBUG11, HCLOAD) modular design, with versatile connector options offers all the same configuration possibilities as Adapt11 prototyping board, backplane, and motor driver boards available other application boards under development programmable in Assembler, BASIC, C compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows

Starter Package contents:

• MicroCore-11 module with demo program in EEPROM
• Standard version has 68HC11E0CFN2 and 8 MHz crystal
• Turbo version has 68HC11E0CFN3 and 9.8304 MHz crystal
• default connector option is -SB, for use with solderless breadboards
• develop your application in place with included ribbon cable and solderless breadboard adapter
• mating connectors (HDR20-M and HDR20-RA) included for your application
• MicroStamp11 User's Guide, 68HC11D3 Programming Reference Guide
• hardcopy full schematics, pinout, and dimensional drawings
• free CD with utilities, documentation, software, and examples.  Here's a partial list of what's included:
• MicroLoad downloader - Windows
• XPad Visual Design Tool (limited demo version) - Windows
• BASIC11- a 68HC11 compiler/simulator/debugger/IDE (limited demo version) - Windows
• ICC11 - ANSI C compiler with IDE (30-day trial) - Windows
• JBug11 - 68HC11 debugger (freeware) - Windows
• NoICE - 68HC11 debugger (shareware) - Windows
• SBASIC - 68HC11 BASIC compiler (freeware) - DOS
• AS11 cross-assembler - DOS
• MicroCore-11 User's Guide - PDF
• Motorola datasheets and reference manual - PDF
• demo program and code examples
• full schematic, pinout and dimensional drawing
• serial cable (DB9F to 4-pin Molex)


Order Online at http://www.technologicalarts.ca/index.php

MicroCore-11 Modules:

• fully assembled and tested MicroCore-11 module without 68HC11 chip (order separately, if needed)
• comes with schematic/mechanical/pinout drawing only
• module supplied with choice of connector options (NC = no connector)
Order Online at http://www.technologicalarts.ca/index.php

Programming Resources for MicroCore-11:

• XPad--  A Visual Design Tool
• XPad is a free software-development environment, which provides a complete visual design, programming, testing, documentation and building suite for MicroCore-11
• no keyboard required--just Point and Click visual programming!
• based on a compact realtime executive kernel
• includes complete ready-to-use libraries for SCI, SPI, I2C, 1-wire, LCDs, servos, etc. with MicroCore-11
• BASIC11 Compiler/Assembler/Editor/Debugger/Simulator


Documentation/files:

• MicroCore-11 Product Data Sheet (532K pdf)
• MicroCore-11 Starter Package Manual
• HC11 Utilities Disk
• Tip Sheet for MicroMouse Builders


Visit the MicroCore-11 Accessories Page