"Turbo" option:

• runs 24% faster, with 9.8304 MHz crystal!
• serial communication up to 38.4K baud!
• faster bootloading!

• max out the memory to 64K!
• 32K SRAM chip "piggy-backed" on top of 32K EEPROM

Features:

• thin board material (0.031")
• light weight:  only 0.2 oz. 
• tiny 1" x 1.4" stamp-sized board
• surface-mount chips for low-profile, high-density design
• features 68HC11D0 microcontroller
• available with 8K or 32K EEPROM
• EEPROM has hardware Write Protect (software write protect also possible)
• 192 bytes on-chip RAM (+32K external SRAM on "MAX" version)
• all PORT A lines available (pulse accumulator, input captures, output compares)
• all six PORT D lines available (any mix of: general purpose I/O, SPI, or SCI)
• 5V low-dropout regulator
• low-voltage inhibit reset circuit
• all available port lines/interrupts/reset brought out to versatile 20-pin header
• convenient switches for RUN/LOAD and WRITE PROTECT (EEPROM)
• programmable in Assembler, BASIC, C
• easy s-record loading via Docking Module, using MicroLoad (Windows program,  included with Starter Package)
• compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows
• modular design, with versatile connector options offers many configuration possibilities
• application boards and accessories under development
• get a Starter Package first-- then buy as many additional modules as you need for all your applications

Resources:
• XPad--  A Visual Design Tool
• XPad is a free software-development environment, which -when combined with a low-cost target-module- gives a complete visual design, programming, testing, documentation and building suite for MicroStamp11
• no keyboard required--just Point and Click visual programming!
• based on a compact realtime executive kernel
• includes complete ready-to-use libraries for SCI, SPI, I2C, 1-wire, LCDs, servos, etc. with MicroStamp11
• Tutorial for MicroStamp11 (look at links under Project Information)
• Product Data Sheet (Rev.2) (252K pdf)
• Press Release
• MicroStamp11 FAQ
• MicroStamp11 vs. BASIC Stamp
• Starter Package Manual


Starter Package Contents:

• MicroStamp11 module with demo program in EEPROM
• Docking Module for PC serial interface (RS232 interface & reset button) to load your programs
• 9-pin serial cable
• default connector option is -FRA
• develop your application in place with included ribbon cable and solderless breadboard adapter
• mating connectors (HDR20-M and HDR20-RA) included for your application
• MicroStamp11 User's Guide, 68HC11D3 Programming Reference Guide
• hardcopy full schematics, pinout, and dimensional drawings
• free CD with utilities, documentation, software, and examples.  Here are some of the included goodies:
• MicroLoad downloader for Windows
• XPad Visual Design Tool (limited demo version) - Windows
• BASIC11- a 68HC11 compiler/simulator/debugger/IDE (limited demo version) - Windows
• ICC11 - ANSI C compiler with IDE (30-day trial) - Windows
• JBug11 - 68HC11 debugger (freeware) - Windows
• NoICE11 - 68HC11 debugger (shareware) - Windows
• SBASIC - 68HC11 BASIC compiler (freeware) - DOS
Order Online at http://www.technologicalarts.ca/index.php
 

MicroStamp11 Modules:

• fully assembled and tested MicroStamp11 module
• comes with schematic/mechanical/pinout drawing only
• module supplied with FRA connector option (unless requested otherwise)
• Docking Module required for program-loading (buy one Starter Package first-- then as many additional modules as you need)

Order Online at http://www.technologicalarts.ca/index.php

Bridgeplane:

• maps 20-pin MicroStamp11 pinout to MicroCore-11's 26-pin footprint
• enables MicroStamp11 to control MicroCore-11 application cards (eg. motor driver)
• two different connector option configurations offered
• click here for details
• Order Codes:   MS11MC11BP1-RA-M1-F-RA and MS11MC11BP1-RA-M1-F-F
temporarily unavailableOrder Online at http://www.technologicalarts.ca/index.php

ComStamp232:

• provides RS232 interface function for MicroStamp11 (instead of Docking Module)
• 6-pin connector for 5V, GND, TXD, RXD, RTS, and CTS inputs
• plug into solderless breadboard (has a 6-pin DIP footprint)
• 9-pin D-sub for RS232 level outputs
• red and green activity LEDs provided for RX and TX monitoring
• Order Code:  CS232- (select connector option)


Order Online at http://www.technologicalarts.ca/index.php