MicroStamp11 has a subset of the pins available on MicroCore-11. This "Bridgeplane" maps the 26-pin MicroCore-11 I/O connector to the corresponding 68HC11 signals on the MicroStamp11 20-pin I/O connector. Equivalent pins are shown in the table to the right. Note that PD0 and PD1 are not brought out to the I/O connector on MicroCore-11.
Example Uses:
- Control any of the MicroCore-11 motor driver boards with a MicroStamp11
- Interface any other MicroCore-11 boards (that do not require analog channels) to a MicroStamp11
The connector option sequence is
from front to back (starting with the 20-pin connectors).
Ordering Information:
 |
| Order Code: MS11MC11BP1-RA-M1-F-RA |
| Price: US$10 (CDN$14) |
 |
| Order Code: MS11MC11BP1-RA-M1-F-F |
| Price: US$10 (CDN$14) |
| 26-pin MicroCore-11 connector Pin# | 68HC11 SIGNAL NAME | 20-pin MicroStamp11
connector Pin# |
| 1 | PA7 | 1 |
| 2 | PA6 | 2 |
| 3 | PA5 | 3 |
| 4 | PA4 | 4 |
| 5 | PA3 | 5 |
| 6 | PA2 | 6 |
| 7 | PA1 | 7 |
| 8 | PA0 | 8 |
| 9 | VRH | -- |
| 10 | PE0/AN0 | -- |
| 11 | PE1/AN1 | -- |
| 12 | PE2/AN2 | -- |
| 13 | PE3/AN3 | -- |
| 14 | PE7/AN7 | -- |
| 15 | PE6/AN6 | -- |
| 16 | PE5/AN5 | -- |
| 17 | PE4/AN4 | -- |
| 18 | GND | 11 |
| 19 | VRL | -- |
| 20 | XIRQ* | 14 |
| 21 | IRQ* | 13 |
| 22 | +5VDC | 12 |
| 23 | PD5/SS* | 15 |
| 24 | PD4/SCK | 16 |
| 25 | PD3/MOSI | 17 |
| 26 | PD2/MISO | 18 |
| -- | PD1/TxD | 19 |
| -- | PD0/RxD | 20 |